# Data Center Security ## Every Door. Every Cage. Zero Blind Spots. Cobalt Monitoring Intelligence provides AI-powered security monitoring purpose-built for high-security data center environments. Edge-native deployment keeps video inside your facility walls. ## The Challenge ### Data Center Security Demands a Different Approach Fifty door events a day — not five thousand. But in a data center, every single one matters. Traditional security monitoring was never built for low-traffic, high-consequence environments where a single unauthorized entry can mean a catastrophic breach. ### Remote Facilities, Unmanned Perimeters Most data centers sit in semi-rural or industrial locations with limited or no on-site security staff after hours. When nobody is watching, every perimeter breach goes undetected until the next morning — if it’s caught at all. ### Every Door Alarm Triggers an Incident In data centers, a single Door Forced Open alarm can trigger a full security incident response — investigators, lockdowns, audit documentation. When 80% of those alarms are false positives from faulty hardware, the cost of not triaging is enormous. ### Mantrap Failures No One Catches Two-door interlocks are the foundation of data center access control. When both doors open simultaneously — defeating the entire interlock purpose — there’s no system watching for it. The mantrap violation goes unrecorded. ### Video That Can Never Leave the Building Strict data sovereignty and compliance requirements mean video footage from inside server halls cannot be transmitted off-site. Any AI monitoring solution must run entirely on-premise — edge deployment isn’t a preference, it’s a requirement. ## The Solution ### How Cobalt Monitoring Intelligence Solves It Purpose-built AI Handlers that understand the unique threat model of data center environments — from mantrap logic to perimeter breach detection at remote locations. 1. **AI Alarm Triage That Eliminates False-Positive Costs** Every Door Forced Open alarm is instantly triaged by a dedicated Handler that cross-references video, access control data, and door sensor history to determine whether the event is a genuine forced entry or a faulty door contact — resolving the alarm in seconds instead of triggering costly incident response. 2. **Mantrap-Aware Interlock Monitoring** Cobalt Monitoring Intelligence understands two-door interlock logic. When both doors in a mantrap sequence open simultaneously, the Handler detects the violation, verifies via linked cameras, and escalates or resolves — monitoring a failure mode that traditional systems miss entirely. 3. **Edge-Native Deployment — Video Never Leaves** Full Handler intelligence runs locally on edge processors inside your data center. Camera feeds are processed, events are triaged, and alarms are resolved without a single frame of video leaving the building — meeting data sovereignty requirements for SOC 2, PCI-DSS, and air-gapped configurations. 4. **Multi-Facility Visibility Without Moving Video** Operators managing multiple data centers see aggregated event metrics, alarm status, and resolution trends on a centralized dashboard — without any video data crossing facility boundaries. Each site runs independently while feeding metadata to a unified view. ## How a Handler Resolves a Server Hall Alarm When a Door Forced Open alarm fires at a server hall mantrap, Cobalt Monitoring Intelligence triages the event in seconds — without a single frame of video leaving your facility. ### Event Detected DFO alarm fires at Server Hall A, Mantrap Door 2 (SH-A-MT2). The Handler activates within seconds. ### AI Reasoning Handler pulls linked camera feed (SH-A-Cam-01), correlates with access control log from LenelS2 OnGuard. No badge tap recorded. Door contact shows intermittent signal — pattern matches known hardware fault. ### Automated Actions Flags event as “Device Issue — Door Contact” and creates a maintenance service ticket. No incident response triggered. Full event documentation with linked video clip archived for audit. ### Event Cleared Auto-resolved in 11 seconds. No human escalation. Maintenance team notified. Audit trail complete with time-stamped video, sensor data, and root cause classification. ## AI Monitoring Across Every Data Center Zone ### Server Halls & Cage Areas #### Where Every Access Event Is Critical Server halls and caged colocation areas are the highest-security zones in any data center. A single unauthorized entry can constitute a catastrophic breach affecting multiple tenants. Cobalt Monitoring Intelligence deploys dedicated Handlers for every access point in these areas. - Tailgating detection at cage-level access points — detecting unauthorized persons following technicians through cage doors - Door Forced Open alarm triage at server hall doors — distinguishing faulty hardware from genuine forced entry to avoid triggering costly incident response - Door Held Open monitoring at rack row and cage access doors after maintenance - Unauthorized person detection in restricted server areas after hours ### Mantraps & Vestibules #### Monitoring the Two-Door Interlock Mantraps are the gatekeepers of data center security — and the most common single point of failure. A mantrap where both doors open simultaneously completely defeats its purpose. Cobalt Monitoring Intelligence monitors the full interlock sequence, not just individual door states. - Mantrap violation detection — both inner and outer doors open simultaneously, defeating the two-door interlock - Tailgating through mantrap sequences — multiple persons entering on a single badge tap - Door Held Open on mantrap doors — a held mantrap door defeats the entire access control zone - Badge data correlation — cross-referencing video with access control to confirm person matches credential used ### Perimeter & External Infrastructure #### Securing the Outer Ring Data centers in remote locations face perimeter threats that corporate campuses never encounter. Without on-site guards, a perimeter breach at 2 AM goes completely undetected. Cobalt Monitoring Intelligence provides 24/7 perimeter monitoring where guards aren’t economically viable. - Perimeter breach detection at facility boundary fencing and gates — especially at remote locations with limited natural surveillance - After-hours person and vehicle detection at perimeter gates and parking areas - Door Forced Open monitoring at generator yard and cooling plant access doors - Environmental zone monitoring — detecting unauthorized persons near HVAC, electrical, and cooling infrastructure ### Loading & Operations Areas #### Operations Floor & Delivery Access Loading docks, network operations centers, and delivery entrances are the highest-traffic zones in an otherwise low-traffic environment. These areas require different monitoring logic — tracking Door Held Open events during deliveries, after-hours access to the NOC, and contractor activity at the main entry. - Door Held Open monitoring at data center loading dock and delivery doors - Door Forced Open triage at operations center entry points - After-hours access monitoring at NOC and operations areas - Visitor and contractor access monitoring at the main entry during business hours ## Built for Environments Where Video Never Leaves the Building Data sovereignty isn’t a feature preference — it’s a compliance requirement. Cobalt Monitoring Intelligence runs the full Handler intelligence stack on edge processors inside your facility. No video frames transmitted off-site. Air-gapped configurations supported. ### Edge Deployment Full Handler intelligence runs locally on edge processors inside your data center. Camera feeds are processed, events are triaged, and alarms are resolved entirely on-premise. Supports air-gapped configurations and meets SOC 2, PCI-DSS, and HIPAA physical security requirements. Video never leaves the facility. ### Hybrid Edge processing for server halls, cages, and restricted zones where data sovereignty is mandatory. Cloud connectivity for operations areas, loading docks, and the centralized multi-site visibility dashboard. Keeps sensitive video local while enabling portfolio-wide analytics. ### Cloud Fully managed cloud deployment for data center operations areas, NOCs, and multi-site portfolios where data restrictions are less strict. Ideal for centralized security operations teams monitoring multiple facilities from a single platform. ## Compliance & Audit ### Every Event Documented. Every Audit Ready. Cobalt Monitoring Intelligence creates a complete audit trail for every physical access event — with linked video, root cause classification, resolution timeline, and operator actions. Built for SOC 2, PCI-DSS, and HIPAA physical security compliance. ### Investigator — All Events Grid View The Investigator provides a searchable, filterable event grid with linked video and full audit trail for every alarm — ready for SOC 2 and PCI-DSS compliance reviews.